Diesel Oil Fired Thermal Oil Boiler 100 , 0000 Kcal Boiler Heater
Best advantages of oil fired thermal oil heater
1. It is easy and convenient to install the boiler,only setting the
boiler on the foundation.
2. Heating surface is formed by round coilers,sufficient
arrangement,reducing thermal load of tubes surface to ensure
safety.
3. Furnace dimensions is matching with the combustion
flame,positive pressure combustion,high radiation heat exchange
efficiency.
4. Boiler structure is compact,saving the floor area of boiler
room.
5. An air pre-heater or heat recovery boiler is placed behind the
boiler to improve the thermal efficiency.
Boiler parameter of thermal oil heater
| Item | Unit | Data |
| Rated capacity | KW(kcal) | 1400KW(1200,000kcal) |
| Design pressure | Mpa | 0.8Mpa |
| Hydrostatictest | Mpa | 1.2 |
| Rated output temperature | °C | 280 |
| Rated return temperature | °C | 250 |
| Heat carrier circulation flow capacity | m³/h | 74.696 |
| Heating area | Radiative heating area | ㎡ | 7.797 |
| Convection tube heating area | ㎡ | 45.29 |
| Heating area of economizer | ㎡ | 25.749 |
| Design efficiency(heavy oil fired) | % | 92.65 |
| Exhaust temperature(heavy oil fired) | °C | 123.56 |
| Fuel consumption (heavy oil fired) | kg/h | 131.8 |
| Heat carrier medium capacity in furnace | m³ | 1.2 |
| Medium flow speed in radiation area | m/s | 2.54 |
| Medium flow speed in convection area | m/s | 2.54 |
| Weight | Ton | 4 |
| Dimension | mm | 3710*1524*2150 |
Basic Features of thermal oil boiler
1. Integrated and wiring device,more convenience for the wire
connection,make overhaul more simply,elegant appearance after
installation
2. Double-deck aluminum silicate for heat preservation,the surface
temperature of the boiler is no higher than 40℃,energy conservation
and efficient
3. Design of angular and smooth surface of outsourcing
panel,prevent the injury accident when checking the equipment
4. The outer oil collecting box is designed to prevent the slow
rate of grease from carbonizing avoid air leakage
5. Double seal groove design, secondary prevent air leakage design,
tight seal, avoid air leakage
6. Unique coil tube repair and integration process, the disk is
compact and no gap,there is no smoke short circuit,long gas flow,
heated fully, high efficiency
7. Boiler multistage energy saving device design (the tail can set
air preheater, wasted heat boiler,economizer),low smoke exhaust
temperature, improve boiler efficiency 10%
8. Research PCL control board independently,strong
compatibility,PLC intelligent touch screen equipment,10-inch touch
screen,fool-type operation,safe and reliable,automatic
ignition/flame-out/fire switch,high fired gas,low pressure
protection,gas leakage protection
9. 60years’precipitation,mature production technicians team,good
matching among the set of equipment,technology skilled,stable
quality
10. Material supplied by large international factory,manufactured
by Anyang Iron Steel and Tianjin Seamless Steel Pipe plant,ensure
the quality
11. Large load imported burner configuration,80% configuration
ratio,light load drive,enough thermal energy import,guaranteed
output,reduce equipment use fatigue,extend the service life,the
quality of inlet valve group is steady and reliable
Our service
1. Nude packaging for boiler main part and wood box packaging for
boiler accessories.
2. Generally use 20 container, 40container or 20 flat rack
container and 40 flat rack container to load the boiler.
3. All goods will be fixed after packing into containers.
4. We have stable shipping company to cooperate for long term. They
will confirm the safety of the goods.
5. Shipping way is different according to customer's country.
Mostly by sea. Some country by train.
